A1 Locksmith - Quality Burglary Safes, Gun Safes, Wall Safes & Floor Safes

When theft is your primary concern a burglary safe may just be the answer. Burglary safes have been designed for home and commercial use to protect items that reach into the many thousands of dollars in value. These safes can thwart sophisticated attacks and also offer varying degrees protection. These are some characteristics of these safes: � 1/4 to 1/2 inch thick solid steel door, recessed for resistance to pry attacks � Formed, high-tensile steel body and jamb construction to maximize protection against pry attacks. � Key changeable combination lock with over 1 million possible combinations � Auxiliary spring �loaded relock device � Locks and relocks protected by a large carbonized hard plate If you have any question, Please call our toll free support # (877) 321-7233 our friendly expert technician can help you choose the electronic burglary safes that�s best for you.

Bolt-down instructions To help provide maximum security, We strongly recommend this safe be bolted down. 1. Select a suitable and convenient location for your burglary safe. Set the safe in place and use the holes provided in the bottom or back of the safe to mark the location of the holes to be drilled in the floor or wall. It is not recommended to attempt to bolt to both floor and wall. If bolting to a wall, please ensure that the safe is resting on a supporting surface, i.e. floor, table or shelf. 2. Move the burglary safe away and drill holes of the appropriate diameter and depth for the type of hardware being used and the mounting surface (2 each � bolts, washers and masonry anchors). 3. Place the Amsec burglary safes back over the holes and install the fasteners as required. 4. NOTE: For maximum security on models which have feet, remove feet before bolting to floor.